When is a wine cellar a grotto?

If this sounds like a punch line to a joke, then please do let me in on the joke.

The answer maybe “When you live in Texas”.

I had a lovely conversation this week with a resident of Texas and since we both have accents and are soft spoken I spent a good 3 minutes believing I had misunderstood when she had asked if we made hardware for wine grottoes, eventually I confessed my ignorance and my vocabulary has now grown.

Turning to Wikipedia I discovered that the word comes from the Italian “grotto” and the French word “grotte” both meaning either a natural or man-made cave or cellar not surprising given that both countries have been making wonderful wines for centuries.

Next I turned by attention to the back set of the door that was being custom made in maple with a proposed back set of 2 3/8”. The back set is the distance from the edge of the door to the center point of the back plate or escutcheon. The wider the back plate the deeper the back set will need to be. The center of the back plate is where the lever or knob will be positioned or in the case of a locking door it will also be where the cylinder face is positioned. The handle set components are centrally positioned on the back plate to give symmetry to the trim. The handle set is then positioned on the door stile and if sufficiently wide will be centered but if space is tight it may be positioned closer to the edge of the door.

Door latches and locks are made with standard back sets with 2 3/8” and 2 ¾” being common for tubular latches and 2 ½” and 2 ¾” being common for mortise locks.

The Grapevine entry lever set has a standard back plate that is 4” with the center being 2”. If the door was built with a bore hole for lever/knob at a back set of 2 3/8” then this would leave a mere 3/8” clearance from the outer edge of the back-plate to the edge of the door an area that will often be caught by the door’s stop which is why we recommend a 2 3/4” back set. For doors that have already been drilled for a 2 3/8” back set we do offer a narrower 3 3/8” back plate with a 1 11/16” center.

The California grape harvest is early this year

Global warming has come to Central California and forced an earlier than usual grape harvest in wine growing regions that include Napa, Paso Robles and Santa Barbara.  Let's hope this is good  news for those of us who enjoy an occasional glass of cab, chardonnay, zinfandel or syrah.  

While the winemakers are busy harvesting all those beautiful vines we thought we might introduce a couple of our custom architectural hardware collections that we feel would be the perfect addition to their tasting areas, guest rooms and other public spaces.

Our Grapevine collection was inspired by the beautiful Paso Robles wine region and is a natural for use in wineries.  The hallmark of Martin Pierce Custom Hardware, incredible detail, is evident in all of the pieces and this attention to detail will delight all who enter your establishment.

Our willow collection would also be a nice design addition to both your public and private spaces.  While simpler in design than our more elaborate Grapevine collection, the same amazing detail and casting process is used to create this elegant hardware collection.

Drawer pull from Willow 2 collection by Martin Pierce Custom Hardware

To view these items or our entire collection of architectural hardware, please visit our site at www.martinpierce.com.  Also, be sure to check your favorite winery's website to find out when the annual harvest celebrations are scheduled.

Just for fun:  Here is to the corkscrew - a useful key to unlock the storehouse of wit,the treasury of laughter, the front door of fellowship, and the gate of pleasant folly.       W.E.P. French