Creating A Custom Appliance Pull Using the Lost Wax Process - the Wax Stage

We are currently working with a local designer who has specified many of our Willow cabinet pulls but who also needed a taller version of our Willow Sprig for use as an appliance pull. The client’s kitchen, not surprisingly, only required 3 large pulls and did not warrant the cost of a new patterns and mold. As our work is made using the lost wax method, we were able to create 3 new pieces by hand and by combining wax models.  Please refer to our earlier post to see how the new pull was designed using a left and right facing Willow Sprig.

Step 1

A total of 3 Willow sprigs were created in wax. A left and right wax sprig were made for each end of the new piece and a section of a second left sprig was used to make a connector between the 2 ends. Picture below shows melted red art wax made by Westech being poured into the sprig mold, the wax has a relatively low meting point of 160 degrees.

Step 2

The mold is held together until the wax has cooled and solidified at which point the mold is pulled apart and the wax pattern thereby released.

Step 3 and 4

The section to be used as a connector was cut from the wax sprig using a heated blade and then further heated with an air torch so that it could be bent to the correct shape.

The ends of the left and right sprig were cleaned and refined with a hand chisel.

Step 5

The ends of the left and right sprig were cleaned and refined with a hand chisel and then joined to the connector using a heated blade which melts the wax enabling it to be melded together to form one continuous piece.

Nature inspired cabinet pulls

The yellowjacket wasp was the model for our open and closed wing wasp cabinet pull and was originally designed for the Ascot Highboy a furniture piece made by our sister company Martin Pierce Furnishings. In keeping with the yellowjacket we finished these pieces with a yellow oxide which we burnished along the wing veins to expose the golden bronze beneath.

The Ascot tallboy was a limited edition of 100 which was closed at number 78 in 2013. The piece was made using quartered English brown oak, selected for its rich brown amber hues and for it’s dark “leoparding” a term that refers to the darker spotted figuring. The open and closed wing wasps were patinated to compliment this distinctive wood.

Several years ago, on a road trip to Idaho, we stayed at Lake Pend Oreille and came across the bald-faced hornet which is a relative of the yellowjacket but being much larger it is referred to as a hornet. The black and white markings of this insect are why it is referred to as bald-faced rather like the way we refer to the “bald” eagle.

Our memory of the hornet’s markings influenced a recent order that called for a simpler black oxide patina. By restricting the black patina to the head and thorax and by burnishing the wings we were able to create a dramatic statement using a simple patina on a small piece.

The wasps are cast in solid silicon bronze and are part of our insect and animal collection of cabinet knobs.